Quick Start (Dante)

Follow this procedure to get running quickly!

  1. Load Preset 16 (Factory settings) from the STATE section

    Presets

  2. In the CLOCK section, choose a sample rate and verify that Dante is chosen as the current clock source.

    Clock

  3. After connecting an analog signal, adjust its gain and phantom power as needed: press the button next to the input.

  4. Then, use the buttons and encoder next to the display to adjust settings as needed.

    Analog input settings

    done! The Dante Controller can now be used to connect signals from the analog inputs of the 12Mic-D to other Dante devices.

Further relevant information:

State
Input
Output