Word Clock

Word clock can be sent and received via 75 Ω coaxial cabling at the corresponding BNC connectors. The cable length should not exceed 100 m (330 ft).

Word Clock I/O
The input is terminated with 75 Ω internally. To pass on the word clock to other devices, use the word clock output. Do not connect a T-adapter to the word clock input.

The state of an incoming word clock signal can be accessed in the CLOCK section.

The Clock Section with highlighted Word Clock Input

Possible States:
  • A green indicator shows that the signal is currently in sync with the chosen clock master.

  • An orange indicator means that a word clock is received but is not in sync.

  • A red indicator means that word clock is chosen as master, but a signal is not present or has a different sample rate than the chosen one.

The state of an incoming word clock signal can be observed in the CLOCK section.

The Clock Section with highlighted Word Clock Input

Possible States:
  • A green indicator shows that the signal is currently in sync with the chosen clock master.

  • An orange indicator means that a word clock is received but is not in sync.

  • A red indicator means that word clock is chosen as master, but a signal is not present or has a different sample rate than the chosen one.